|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. 5mm Pitch Miniature Potting Connector for Secondary Power Supply DF5 Series Features 1. Potting Product This connector is capable of potting 9mm maximum, and 22.5mm mounting height is a low profile. (Figure 1). Single row type 2. Prevent Mis-insertion When the socket and pin header are mated, this connector is equipped with a mechanism to prevent reverse insertion or dissimilar contact insertion. 3. Means to Prevent Solder Cracks The pin header employs glass enforced resin, and takes countermeasures to prevent solder cracks due to heat shrinkage. Figure 1-1 4. Prevent Reverse Insertion in Printed Board Boss is added to the pin header, and prevents reverse insertion in the printed board. Double row type 5. Full Lock Mechanism The outer lock system employs full lock mechanism. 6. Current Capacity of 8A Power can be supplied at 8 A maximum. Specification will change according to applicable cable, number of contacts, number of rows. For further information, refer to product specifications as listed on next page. Figure 1-2 Applications Business machines, industrial equipment, consumer appliances (hot water supply, washing machines, refrigerator) etc. B123 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued,Miniature Potting Connector for products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. DF5 Series5mm Pitch or will be discontinued soon. Please check the Secondary Power Supply Product Specifications No. of rows Single row No. of contacts 2 to 10 4 6 8 10 12 14 16 AWG#18 AWG#20 AWG#22 8A 6A 5A 8A 6A 5A 8A 6A 5A 7A 6A 5A 7A 6A 5A 7A 6A 4A 7A 5A 4A 7A 5A 4A 500V AC 500V DC 1500V AC/1 minute 100mA Measured with 1.140.002mm steel pin Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 96 hours at temperature of 40c and humidity of 90% to 95% (-55c: 30 minutes15 to 35c: 10 minutes85c: 30 minutes5 to 35c: 10 minutes ) 5 cycles 30 cycles Flow: 260c for 10 seconds Manual soldering: 350c for 3 seconds Operating Temperature Range Operating Moisture Range -35 to +85c(Note 1) 40 to 80% Rating Current rating Double row Storage Temperature Range Storage Humidity Range -10 to +60c(Note 2) 40 to 70%(Note 2) Voltage rating Item 1. Insulation Resistance 2. Withstanding voltage 3. Contact Resistance 4. Single Insertior/ Extraction Force 5. Vibration 6. Humidity (Steady state) 7. Temperature Cycle 8. Durability (Mating/un-mating) 9.Resistance to Soldering heat Specification 1000M ohms min. No flashover or insulation breakdown. 30m ohms max. 0.3N (30gt) min., 4.5N (450gt) max. No electrical discontinuity of 10s or more Contact resistance: 30m ohms max., Insulation resistance: 500M ohms min. Contact resistance: 30m ohms max., Insulation resistance: 1000M ohms min. Contact resistance: 30m ohms max. No deformation of components affecting performance. Condition Note 1: Includes temperature rise caused by current flow. Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. Note 3: Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for a specific part number shown. Material Product Crimping Socket Crimping Contact for Socket Pin header Part Insulator Contact Insulator Contact Material Polyamide Phosphor bronze Polyamide Brass Finish White Tin plated Beige Tin plated Remarks UL94V-0 -------------------UL94V-0 -------------------- Ordering Information Connector DF5A 1 1 2 3 -*S - 5 C 2 4 5 3 4 5 Contact Pitch: 5mm Contact type C : Crimping Socket DSA : Straight pin header Series Name: DF5A Number of contacts: Single row: 2 to 10 Double row: 4 to 16 Connector type S : Single row socket DS : Double row socket P : Single row header DP : Double row header Contact DF5A - 1822 SCF 1 1 Applicable cable type None: UL 1007 equivalent (jacket diameter 1.5 to 2.2mm) A: UL 1015 equivalent (jacket diameter 2.2 to 2.9mm) Applicable cable size 1822: AWG#18~#22 2 3 3 packaging type SCF : Socket contact, reel packaging SC : Socket contact, bag packaging 2 B124 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search Potting Connector foror contact your Hirose salesSupply DF5 Series5mm Pitch Miniature at www.hirose-connectors.com, Secondary Power representative. Single Row Socket Contact No. indicator Contact Inserted Product No DF5A- 2S-5C DF5A- 3S-5C DF5A- 4S-5C DF5A- 5S-5C DF5A- 6S-5C DF5A- 7S-5C DF5A- 8S-5C DF5A- 9S-5C DF5A-10S-5C CL No. 676-0007-8 676-0008-0 676-0009-3 676-0010-2 676-0011-5 676-0012-8 676-0013-0 676-0014-3 676-0015-6 Number of Contacts 2 3 4 5 6 7 8 9 10 A 5.0 10.0 15.0 20.0 25.0 30.0 35.0 40.0 45.0 B 10.5 15.5 20.5 25.5 RoHS 30.5 YES 35.5 40.5 45.5 50.5 Note: A packaging quantity is delivered by the bag unit (100 pcs.). Single Row Pin Header Polarity mark Part Number DF5A- 2P-5DSA(05) DF5A- 3P-5DSA(05) DF5A- 4P-5DSA(05) DF5A- 5P-5DSA(05) DF5A- 6P-5DSA(05) DF5A- 7P-5DSA(05) DF5A- 8P-5DSA(05) DF5A- 9P-5DSA(05) DF5A-10P-5DSA(05) CL No. 676-0016-9-05 676-0017-1-05 676-0018-4-05 676-0019-7-05 676-0020-6-05 676-0021-9-05 676-0022-1-05 676-0023-4-05 676-0024-7-05 Number of Contacts 2 3 4 5 6 7 8 9 10 C 5.0 10.0 15.0 20.0 25.0 30.0 35.0 40.0 45.0 D 12.5 17.5 22.5 27.5 32.5 37.5 42.5 47.5 52.5 RoHS YES Note: A packaging quantity is delivered by the bag unit (100 pcs.). B125 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued,Miniature Potting Connector for products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. DF5 Series5mm Pitch or will be discontinued soon. Please check the Secondary Power Supply Double Row Socket Contact No. indicator Contact Inserted Part Number DF5A- 4DS-5C DF5A- 6DS-5C DF5A- 8DS-5C DF5A-10DS-5C DF5A-12DS-5C DF5A-14DS-5C DF5A-16DS-5C CL No. 676-0025-0 676-0026-2 676-0027-5 676-0028-8 676-0036-6 676-0037-9 676-0038-1 Number of Contacts 4 6 8 10 12 14 16 E 5.0 10.0 15.0 20.0 25.0 30.0 35.0 F 10.5 15.5 20.5 25.5 30.5 35.5 40.5 RoHS YES Note: A packaging quantity is delivered by the bag unit (100 pcs.). Double Row Pin Header Polarity mark Part Number DF5A- 4DP-5DSA(05) DF5A- 6DP-5DSA(05) DF5A- 8DP-5DSA(05) DF5A-10DP-5DSA(05) DF5A-12DP-5DSA(05) DF5A-14DP-5DSA(05) DF5A-16DP-5DSA(05) CL No. 676-0029-0-05 676-0030-0-05 676-0031-2-05 676-0032-5-05 676-0033-8-05 676-0034-0-05 676-0035-3-05 Number of Contacts 4 6 8 10 12 14 16 G 5.0 10.0 15.0 20.0 25.0 30.0 35.0 H 12.5 17.5 22.5 27.5 32.5 37.5 42.5 RoHS YES Note: A packaging quantity is delivered by the bag unit (100 pcs.). B126 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search Potting Connector foror contact your Hirose salesSupply DF5 Series5mm Pitch Miniature at www.hirose-connectors.com, Secondary Power representative. BPCB mounting pattern (Board thickness = 1.60.1) DF5A-*P-5DSA (05) DF5A-*DP-5DSA (05) Note 1. For C and G sizes, please refer to pages where individual product patterns are shown. BApplication Pattern Socket Crimping Contact Part Number DF5-1822SCF DF5-1822SC DF5A-1822SCF DF5A-1822SC HRS. No. 676-0001-1 676-0002-4 676-0003-7 676-0004-0 Applicable Cable UL style Jacket dia. AWG size Contact construction 1007 1015 1.5 to 2.2 AWG#18 43 cores/0.16mm AWG#20 21 cores/0.18mm 2.2 to 3.2 AWG#22 17 cores/0.16mm Packaging Type Reel Bag Reel Bag Quantity 5,000 100 5,000 100 J 2.8 3.8 K 3 RoHS YES 4 Note 1. The applicable cable conductor is a tin plated and annealed copper wire. Note 2. If other cables are used instead of the applicable cable, contact the HRS Sales Department. Strip length: 3 to 4mm BApplicable Crimping Tools Type Item Press unit Automatic Applicator Part Number CM-105 AP105-DF5-1822S AP105-DF5A-1822S DF5-1822/CR-HT DF5A-1822/CR-HT RP13-PC-TP CL No. 901-0005-4 901-4542-5 901-4546-6 550-0264-0 550-0265-2 150-0021-5 Applicable Contact -----------------------------DF5-1822SCF DF5A-1822SCF DF5-1822SC DF5A-1822SC DF5/DF5A-1822SCF Manual ----- Manual crimping tool Extraction tool Note: If any trouble has been caused due to other tools, which are not designated by Hirose, Hirose won't guarantees any product. B127 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued,Miniature Potting Connector for products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. DF5 Series5mm Pitch or will be discontinued soon. Please check the Secondary Power Supply BPrecautions 1. Recommended soldering condition 2. Cleaning condition 3. Connecting condition 4. Cautions 5. Precautions Flow: 260c for 10 seconds Manual soldering: 350c for 3 seconds Refer to the "Nylon Connector Use Hand book" Refer to the "Nylon Connector Use Hand book" The color phase of this product may be slightly differ from that of the formed product according to the manufacturing lot, and consequent storage condition, however, the difference affects no performance. Refer to the "Nylon Connector Use Hand book" B128 |
Price & Availability of DF5A-10DP-5C |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |